Agilent Technologies Option H48 Multiport Test Set Z5623A - Manual (Page 35)

Agilent Technologies Z5623A Option H48 3-3
Using the Network Analyzer to Control the Test Set
Preparing the Analyzer to Control the Test Set
Step 4. In the SICL/GPIB window, click System Controller and then OK. See
Figure 3-2, “SICL/GPIB Window.”
Figure 3-2 SICL/GPIB Window
Step 5. Locate the Minimize button (“_”) in the top right corner of the window.
See the upper right-hand corner of Figure 3-2 . See also the magnified
view shown in Figure 3-3, “Minimize Window.” If the button is not
visible, click on the View menu, then scroll down to Title Bars and click
on it. When the Minimize button is visible, minimize the analyzer
window by clicking on the button.
Figure 3-3 Minimize Window
Click on