Agilent Technologies Option H48 Multiport Test Set Z5623A - Manual (Page 81)

Agilent Technologies Z5623A Option H48 5 -13
Performance Verification
Setting Up Limit Testing
Shortcuts:
a. To specify a Segment Type, click the Segment Type box in the
desired row, then use the drop-down menu.
b. To specify a Beginning Stimulus or an Ending Stimulus, click the
respective box in the desired row, then enter the desired value
followed by “k” if the value is in kilohertz, or by “g” if the value is in
gigahertz. For example, to specify a Beginning Stimulus of 300 kHz,
type, “300k” (without the quotation marks). To specify an Ending
Stimulus of 1.3 GHz, type, “1.3g” (without the quotation marks).
c. To specify a Beginning Response or an Ending Response, click the
respective box in the desired row, then enter the desired value in dB,
then hit the space bar. For example, to specify a Beginning Response
of
−1.8 dB, type, “−1.8<space>”.
d. Use the tab key to advance from left to right across a row. Use
<shift><tab> to advance from right to left across a row. (When
moving from right to left, the cursor will not move until you release
the shift key.)
Figure 5-10 Empty Limit Table
Figure 5-11 Completed Limit Table for Insertion Loss
Table 5-4 Limit Table Entries for Insertion Loss
Segment
Number
Limit
Type
Beginning
Stimulus
Ending
Stimulus
Beginning
Response
Ending
Response
1 Min 300 KHz 1.3 GHz −1.8 dB −1.8 dB
2 Min 1.3 GHz 3 GHz
−2.3 dB −2.3 dB
3 Min 3 GHz 6 GHz
−2.8 dB −2.8 dB
4 Min 6 GHz 9 GHz −3.8 dB −3.8 dB