Agilent Technologies Option H48 Multiport Test Set Z5623A - Manual (Page 44)

3-12 Agilent Technologies Z5623A Option H48
Using the Network Analyzer to Control the Test Set
Restoring the Analyzer to its Normal Configuration
Restoring the Analyzer to its Normal
Configuration
It is a good idea to restore the analyzer to its normal configuration once
you are finished using the analyzer to control the test set. To
accomplish this, use the following procedure:
Step 1. Type q in the command window, then press the <Enter> key. This
terminates the interactive control session on the analyzer.
Step 2. In the analyzer window, click System on the menu bar, then scroll
down to Configure, then click SICL/GPIB.
Step 3. In the SICL/GPIB window, click Talker/Listener and then OK. This
allows other devices to control the analyzer.