Agilent Technologies Option H48 Multiport Test Set Z5623A - Manual (Page 41)

Agilent Technologies Z5623A Option H48 3-9
Using the Network Analyzer to Control the Test Set
A List of GPIB Commands
A List of GPIB Commands
NOTE Every Test Port is connected to one and only one of the following at any
instant:
• Reflection port of the test set.
• Transmission port of the test set.
• 50
Ω termination inside the test set.
Table 3-2 Test Port Commands
Connection Path GPIB
Command
Reflection to Port 1 refl_01
Reflection to Port 2 refl_02
Reflection to Port 3 refl_03
Reflection to Port 4 refl_04
Reflection to Port 5 refl_05
Reflection to Port 6 refl_06
Reflection to Port 7 refl_07
Reflection to Port 8 refl_08
Transmission to Port 1 tran_01
Transmission to Port 2 tran_02
Transmission to Port 3 tran_03
Transmission to Port 4 tran_04
Transmission to Port 5 tran_05
Transmission to Port 6 tran_06
Transmission to Port 7 tran_07
Transmission to Port 8 tran_08
Reset *rst
Reflection Termination *r_term
Transmission
Termination *t_term
All Termination *all_term