LumaSense Technologies 3434i SF6 Leak Detector - Manual (Page 20)

Chapter 2
______________________________________________________________________
_____________________________________________________________________________
BE6028-14 3434i SF6 Leak Detector LumaSense Technologies A/S
Page 20 of 191
available Ethernet settings. The screen display now shows the
following text.
3. Here you can select whether the IP address of the 3434i gas
monitor is to be assigned by a DHCP server in the local network.
If you want the 3434i's IP address to be assigned by the DHCP
server press the S3 (Yes) key, where after you will proceed to the
below step 6 as the IP address is set by the DHCP server. If you
want yourself to set the IP address of the 3434i press the S1 (No)
key. The screen display now shows the following text.
4. Here you can change the IP address of the 3434i gas monitor in
case the IP address is not set by a DHCP server in the local
network. If you want to change the IP address, press the
¿ key. If
the IP address does not need to be changed, press the ▼ key and
you will proceed to the below step 6.
If you selected to change the IP address, the screen display now
shows the following text.
5. Here you can change the 4 individual numbers in the IP address
by using the ▲ and ▼ keys. Each of the 4 individual numbers can
be set in the range from 000 to 255.
You can step between the 4 individual numbers in the IP address
by using the ◄ and ► keys.
In case you want to return to the start value of the IP address
press the S1 (CANCEL) key. In case you want to return to the
default stored value of the IP address press the S3 (DEFAULT)
key.
When you have set the IP address, press the
¿ key. The screen
display now shows the following text.
IS 3434i'S IP ADDRESS SET BY DHCP ?
NO YES
3434i 'S IP ADDRESS 192.168.000.200
PRESS ENTER TO CHANGE VALUE
3434i'S IP ADDRESS 192.168.000.200
CANCEL DEFAULT
3434i'S IP PORT NUMBER: 23
PRESS ENTER TO CHANGE VALUE