LumaSense Technologies 3434i SF6 Leak Detector - Manual (Page 53)

Chapter 4
______________________________________________________________________
_____________________________________________________________________________
BE6028-14 3434i SF6 Leak Detector LumaSense Technologies A/S
Page 53 of 191
After scrolling through the list of individual measurement results for
water vapour the following screen displays appear:
SAMPLING IS CONTINUOUS
MONITORING PERIOD IS NOT PRE-SET
COMPENSATION FOR WATER VAP.
INTERFERENCE
MONITORING TASK STARTED 2014-01-16 09:50
MEASUREMENT CHAMBER TEMPERATURE 39.6°C
SAMPLE INTEGRATION TIME W: 5s
A: 5s B:___s C:___s D:___s E:___s
A: Sulphur hexafluoride B:_________ C:___________
D: _________ E:__________ W: WATER VAP
DATA IN DISPLAY MEMORY RECORDED FROM
2014-01-16 09:50 TO 2014-01-16 10:04
Note that the screen showing the overview of gas concentrations
measured during any particular measurement cycle is no longer
shown when the monitoring task has been stopped.
2. Press u.
This causes the following text to appear on the screen:
FILTER A USED TO MEASURE
Sulphur hexafluoride
3. Press q to scroll through the following data displays:
GAS A: MAX 14.5E+00 m 8.03+00
ALARM 1________ MIN 7.42E+00 s 2.36E+00