LumaSense Technologies 3434i SF6 Leak Detector - Manual (Page 66)

Chapter 5
______________________________________________________________________
_____________________________________________________________________________
BE6028-14 3434i SF6 Leak Detector LumaSense Technologies A/S
Page 66 of 191
6. To change the time, press ¿ .
7. Use the direction push-buttons to enter the correct time. If you
make a mistake in entering the correct date just press S1 and
start again.
8. Press ¿ to accept the time.
When Step 8. has been completed the display then moves to the
previous head of the set-up “tree”.
9. Press p three times. The screen display shows the following text:
10. Press SET-UP to exit the set-up function.
5.4.2 Adjusting the Sound Level
During certain operations or, for example, when an incorrect push-
button is pressed, the Monitor emits a “beep”. You choose the
volume of the Monitor’s “beep”. The volume of the “beep” is
expressed on a scale from 0 (no “beep”) to 3 (loudest “beep”). Table
5.3 provides details of the available choices and the default value of
this parameter.
Table 5.3 The available choices and the default value of the
Monitor’s “beep”
Display Text Available Choices Default Value
ENTER SOUND VOLUME 0 0, 1, 2, 3 1
To set the volume:
CURRENT TIME 12:00
PRESS ENTER TO CHANGE VALUE
SELECT SET UP BRANCH
MEASUREMENT FORMAT CONFIGURATION