Seed Hawk Raven 2010 - Manual (Page 101)

4
Manual No. 016-3001-003 91
Navigating the Viper Pro Interface
3.
Press the corresponding Color button. The Feature Colors screen displays.
4.
Select a color for the feature and press OK. Viper assigns the color to the feature and returns to the Enter
Feature Names and Colors screen.
5.
To setup more field features, repeat step 2 through 4.
6.
Press OK when you have finished entering the features. Viper saves the feature information and returns
you to the main screen.
Recording Field Features
Field features are recorded with the Viper Pro in the same way as recording a Field Boundary. For a step-by-
step procedure for recording field features, review the How to Mark a Field Boundary section on page 82.
Coverage Maps
The Coverage Map feature of the Viper Pro creates an as-applied map for the job in progress. After the job is
completed, the map may be transferred from the Viper Pro console to a home or office PC for viewing and
printing application reports for each job.
In addition to the job reports, the Coverage Map displays real-time product rate information for operator
reference. Areas where the rate of product application is not within acceptable limits are displayed during the
application. This information can help an operator make adjustments to product application on-the-fly.
Coverage Map information is displayed on the Guide, Rx+Cov+Scout, and the Cov tabs during job
applications.