Seed Hawk Raven 2010 - Manual (Page 82)

Chapter 4
72 Seed Hawk™ Viper Pro™ Installation & Operation Manual
GPS Status Screen
Touch the GPS status area to view the GPS Status screen. This screen displays information received from the
DGPS receiver and may also display helpful information if the console detects and issue with DGPS reception.
Touch the COG Filter button to display the Course Over Ground Filter Selection screen. Review the on-screen
COG Filter description and select the appropriate filtering level.
Select the View Data button to view “raw” GPS data coming from the DGPS receiver into the Viper Pro
console via the DGPS port on the main interface cable (P/N 115-3001-011).
Press OK to return to the Viper Pro main screen.
Product Control Status
The status of the CAN system is displayed in this area.
The Product Control status indicator will display green during normal operation. If an error such as an enabled
alarm condition is detected in the CANbus system, the status indicator will appear yellow. If the CANbus
system is offline or not available, the status displays in red. Touch the product control status indicator to view
the CAN Controller Status screen and access the various node settings and calibration values.
Review Chapter 3, CAN (Controller Area Network) Setup, for more information on the product control status
and using the CAN Controller Status screens on the Viper Pro console.