Seed Hawk Raven 2010 - Manual (Page 83)

4
Manual No. 016-3001-003 73
Navigating the Viper Pro Interface
Packing Pressure
The current pressure on the packer gauge wheels is displayed at the bottom of the Viper Pro display.
Use the packing pressure switch on the Seed Hawk switch box to increase or decrease pressure on the
packing wheels.
Display Data
Press the Display Data button to view product information from each product node in the CANbus system on
the main screen.
The field volume, field area, tank volume, total volume, total area, and area per hour is displayed within the
Display Data screen.
Note:
The data displayed by pressing this button is also available by touching within the Product Control
area and selecting the Tally Registers button at the bottom of the CAN Controller Status screen.
Press the Display Data button to view the first data screen in the lower portion of the Map area. Press within
the displayed data area to toggle to the next data screen, including weather information if an optional weather
station has been installed. To hide the data display, press the Display Data button again.
Note:
See Appendix H, Weather Station, for more information on the optional weather station available
for use with the Viper Pro console.