Tracked tractor – Seed Hawk Raven 2010 User Manual

Page 118

Advertising
background image

Chapter 4

108

Seed Hawk™ Viper Pro™ Installation & Operation Manual

Tracked Tractor

Note:

The pivot point of a tracked tractor is in the center of the track length on the center-line of the
vehicle.

1.

Enter the left/right offset of the GPS antenna from the pivot point. The left/right offset must be measured

perpendicular to the direction of forward travel.

2.

Select the direction of the left/right offset. To determine the offset direction, assume you are standing at the

pivot point. Is the antenna to your left or to your right?

3.

Enter the fore/aft offset of the GPS antenna from the pivot point. The fore/aft offset must be measured

parallel to the direction of forward travel.

4.

Select the direction of the fore/aft offset. To determine the offset direction, assume you are standing at the

pivot point. Is the antenna in front (fore) or behind (aft) you?

5.

Measure the distance from the pivot point (center of track length) to the control point or hitch.

6.

Touch the Next button and continue to the Drill Setup section on page 110.

GPS Antenna Fore/Aft
Measurement

GPS Antenna Left/
Right Measurement

Pivot/Control Point
Distance

Advertising