Seed Hawk Raven 2010 - Manual (Page 95)

4
Manual No. 016-3001-003 85
Navigating the Viper Pro Interface
Menu
Several selections and configuration screens are available through the Menu button located in the lower-right
corner of the Viper Pro main screen. The Menu is used to start and manage job files, configure several system
preferences and features and to shut down the Viper Pro console.
To access these settings and features, touch the Menu button to open the first level menu options.
Exit Button
To close the Viper program, touch the Exit button. The following prompt will appear.
Select Exit to Menu to view the Program Selection Menu, Shutdown Viper to power down the console, or
Cancel
to resume the Viper Pro program.
Note:
If a job is in progress when the exit button is selected, the Viper Pro will display a warning alerting
the operator. Exit the Viper Pro application without closing the job, touch Yes. Raven recommends
closing any open jobs before exiting the Viper Pro application to avoid losing job information.