Seed Hawk Raven 2010 - Manual (Page 61)

3
Manual No. 016-3001-003 51
CAN (Controller Area Network) Setup
Application Area
The Application Area displays the current settings for the application and valve type. The application and valve
type may be different for each product node in the Viper Pro CAN Control system.
To modify settings for the selected node:
1.
Touch within the Application Area on the CAN Controller Status screen.
Note:
The selected product control node appears with a check mark in the corresponding radio button in
Data Box 1. To switch the selected node, touch the radio button for the desired product node.
2.
The Node Settings screen displays for the selected product node. Select the type of valve and application
being controlled by the selected product node. For products 1 through 3, the valve type should be set to
standard and the application type is locked to Gran 4 when operating a Seed Hawk system with a ground
drive cart.
Status Screen Example
(Products 1-3)
Status Screen Example
(Products 4-5)