Seed Hawk Raven 2010 - Manual (Page 219)

APPENDIX
E
Manual No. 016-3001-003 209
Appendix E
Testing Extension
Cables
Speed Sensor Cable
Verify that the system is in the Wheel Speed Sensor mode while testing the cable. Disconnect the cable from
the Speed Sensor Assembly cable.
Pin Designations and Voltage Readings
The following tables show the following pin designations and voltage readings.
Testing the Speed Sensor Cable
1.
Press Product Control.
Pin Location Designation
A Power
B Ground
C Signal
Pin Connections Voltage
B to C 12 Volts
B to A 12 Volts