Speed, Fan rpm, Pressure – Seed Hawk Raven 2010 User Manual
Page 76: Speed fan rpm pressure
Chapter 4
66
Seed Hawk™ Viper Pro™ Installation & Operation Manual
Speed
The current speed of the vehicle displays in the upper right-hand corner of the screen.
Review the Speed Cal section on page 28 for more information on calibrating the Viper Pro speed display.
Fan RPM
The monitored fan RPM is displayed on the Main screen.
Review the Fan Cal section on page 26 for information on calibrating and setting options for the fan RPM
display.
Pressure
The pressure of a liquid product control node may be displayed on the Viper Pro. During an active job, the
pressure of either product 4 or product 5 may be monitored in the pressure display on the main screen.
Note:
P2 is currently not used.
Review the Pressure Area section on page 50 for more information on calibrating a pressure transducer with
the Viper Pro console.