Seed Hawk Raven 2010 - Manual (Page 43)

3
Manual No. 016-3001-003 33
CAN (Controller Area Network) Setup
Note:
The following sections offer descriptions of the various options and settings used with products 1
through 3. For descriptions of the settings used with products 4 and 5, see the Data Box 1 for
Products 4-5 section on page 35.
Node Settings Screen (Page 1)
Touch within Data Box 1 to view the first Settings screen for the selected node.
Note:
Press the Next button to access additional options and settings found on the selected Node
Settings screen.
Off Rate %
Use the Off Rate % to set the allowable difference between the actual and target application rates. If a non-
zero value is entered for this setting and the Off Rate % is exceeded for longer than five seconds, the Viper Pro
will display an off rate alarm. Enter a value of zero to disable the off rate % and off rate alarm.
Note:
If the Audible Alarms feature is enabled, the Viper Pro will sound an alert tone if the Off Rate Alarm
is activated. See the Audible Alarms section on page 31 for more information on Audible Alarms.
Low Limit
This setting is not used with Seed Hawk air cart ground drive systems. The low limit default setting is zero and
should not be altered.
Low Tank
This setting is not used with Seed Hawk air cart ground drive systems. The low tank default setting is zero and
should not be altered.