Seed Hawk Raven 2010 - Manual (Page 27)

2
Manual No. 016-3001-003 17
Installation, Start Up & Registration
To register your Viper Pro:
1.
On the main screen, touch the Menu button.
Select Setup then Reg. Keys to display the Validation Data screen.
2.
Write down the Machine ID and Validation Code from your Viper Pro console on the Registration Code
sheet; an example is shown below.
FIGURE 2. Machine ID and Validation Code
Please note that your Registration Code appears on this sheet as well. You will need this number for future
use.
Registration Code
This is the Registration Code for a Viper. Do not misplace this paper or you will not be able to register your product.
3M8828-000102-03667-0102-000L
To register your product and receive an Activation Key go to www.ravenprecision.com, select the Support tab and
choose Product Registration.
Product Options
Multi - Product (077-0171-152)
Weather Station (077-0180-030)
Order Number
XXXXXX
PO Number
XXXXXX
______________________________________________________________________________
The Viper machine id and validation code is obtained from the unit that will be registered.
Turn on the Viper and select the 'Menu' button on the main screen. Press the 'Setup' button then the 'Reg Keys'
button.
Write down the Machine ID ____________ and Validation Code ________________________. They will be
needed in the online registration process.
xxxxxxxx xxxxxxxx