Seed Hawk Raven 2010 - Manual (Page 40)

Chapter 3
30 Seed Hawk™ Viper Pro™ Installation & Operation Manual
7.
Begin driving the machine toward the test distance starting point at normal speed. When the beginning of
the test distance is reached, touch the Begin Cal Run button. **Calibrating** will begin flashing on-screen.
8.
Drive the test distance.
9.
At the end of the measured test distance, press the End Cal Run button. The new speed cal value will be
calculated automatically.
10.
Press Yes and the new speed cal will be applied.
Note:
Press No to discard the calculated speed cal and continue using the existing value.