Seed Hawk Raven 2010 - Manual (Page 72)

Chapter 4
62 Seed Hawk™ Viper Pro™ Installation & Operation Manual
Profile
The name of the currently enabled profile is displayed in the upper left-hand corner of the main screen.
Profiles may be setup for various seeders to allow the Viper Pro to be transferred between seeders quickly and
efficiently. The enabled profile name displays only when a job is not in progress.
During a job, the name of the enabled product is displayed in the upper left-hand corner of the main screen. If
multiple products are enabled, the Viper Pro displays a product selector and the name of the selected product
in the upper left-hand corner.
Profile Changes
If any of the settings saved within a profile are changed via the Viper Pro user interface, the Viper Pro will
request the operator to save the current profile settings before the console is powered down.
To save the new profile, type in a new profile name and touch OK.
Note:
Check the ‘Use this profile on next Viper startup’ button if you would like the Viper Pro system to
load and use this profile the next time you turn the power on.
See the Profile Configuration section on page 98 for more information on working with and saving
Profiles.