Seed Hawk Raven 2010 - Manual (Page 240)

Appendix I
230 Seed Hawk™ Viper Pro™ Installation & Operation Manual
To register:
1.
Touch the Wireless Status icon on the Viper Pro main screen and select the Registration tab.
2.
Touch the “Registration Code” button to get a four digit registration code from the Slingshot™.
3.
With the registration code, login to the Slingshot™ site.
http://slingshot.raveniat.net
4.
Select the “Register a Device” button.
5.
Enter the required device information and the four digit registration code from the Viper Pro.
Note:
Be sure to enable the Remote Service and Web Access features if desired (recommended). These
features may be enabled later by accessing the Slingshot™ site.
6.
Select the “Register” button.