Airedale SmartCool 11-233kW - Manual (Page 111)

Precision Air Conditioning SmartCool
TM
– D
Precision Air Conditioning
111
Installation, Maintenance and Commissioning Manual :6877419 02/2013
Mechanical Data- W2C0 Continued
SC31D055-W2C0 SC31D065-W2C0 SC31D075-W2C0
Standard Dry Cooler Match 1 x DR70 1 x DR95 1 x DR95
Capacity
Nom Cooling (Gross) – W2 (1) kW 54.5 61.8 66.8
Nom Cooling (Gross) – C0 (2) kW 107.0 121.6 135.2
Total Heat of Rejection – W2 kW 68.7 78.0 84.2
Capacity Steps 2 2 3
Fan Gain (6) kW 1.25 2.06 3.22
Dimensions – W x D x H Mm 3113 x 890 x 1980 3113 x 890 x 1980 3113 x 890 x 1980
Weight – Machine / Operating (3) Kg 1210 / 1260 1220 / 1270 1220 / 1270
Construction Panels: Galvanised Sheet Steel, Epoxy Baked Powder Paint - Black Grey (RAL 7021)
Material/Colour Frame: Anodised Aluminium Frame with Black Nylon Corners
Evaporator Rifled Copper Tube/Turbulated Hydrophilic Coated Aluminium Fins
Cooling/Dehum Stages 3/1 2/1 2/1
Cooling Coil – C0 Copper Tube/Turbulated Hydrophilic Coated Aluminium Fins
Cooling /Dehum Stages 1 (Modulated) / 1
Water Volume l 52.3 52.3 52.3
Water Flow l/s 4.18 4.7 5.16
Pressure Drop C0 kPa 38.3 45.4 52.31
Condenser Stainless steel Brazed Plate
Water Volume l 9.9 9.9 9.9
Water Flow l/s 3.35 3.82 4.13
Pressure Drop Condenser kPa 38.12 48.83 56.61
Dry Cooler
Water Volume l 55.9 55.9 55.9
Flowrate l/s 3.35 3.82 64.85
Pressure Drop kPa 82.5 73.3 80.9
Fan Motor Backwards Curved, Centrifugal direct drive
Motor Type EC EC EC
Quantity x Motor Size kW 3 x 3.1 3 x 3.1 3 x 3.1
Speed @25Pa / Maximum ESP RPM 1061 / 1520 1261 / 1520 1479 /1520
Maximum ESP Pa 528 330 77
Nominal Airflow m³/s 5.8 6.9 7.9
Compressor – Scroll
Configuration – W2C0 Dual Cool - Circuit 1 Tandem Compressors (Refrigeration) / Circuit 2 Chilled water
Quantity – W2C0 2 2 2
Oil Charge Volume – W2C0 l 3 x 3.3 2 x 3.3 2 x 3.3
Oil Type Polyolester
Connections
Water Inlet / Outlet –W2 mm 42 42 42
Water Inlet / Outlet – C0 mm 42 42 42
Condensate Drain Hose mm 22 22 22
Filtration Disposable to BS EN 779-G4
Quantity 4 4 4
OPTIONAL EXTRAS
Hot Gas Reheat - (4)
Nom Heating (Gross) kW 14.6 16.1 16.1
Electric Heating (Total) kW 31.5 31.5 31.5
Humidifier
Capacity kg/hr 8 8 8
Feed/Drain 3/4" BSPF Braided flexible hose / 19mm hose connection
Condensate Pump
Head m 10.8 10.8 10.8
Flow l/m 5 5 5
Drain 10mm Stainless steel Stub Connection
First upgrade Motor - EC Motor
Quantity x Motor Size kW N/A N/A N/A
Speed @ 25Pa / Maximum ESP rpm N/A N/A N/A
Maximum ESP Pa N/A N/A N/A
Fan Gain (6) kW N/A N/A N/A
Second upgrade Motor - EC Motor
Quantity x Motor Size kW N/A N/A N/A
Speed @ 25Pa / Maximum ESP rpm N/A N/A N/A
Maximum ESP Pa N/A N/A N/A
Fan Gain (6) kW N/A N/A N/A
Low Pressure Hot Water (5) Copper Tube/Aluminium Fin
Capacity Gross kW 40.6 43.8 45.2
Water Flow (Nominal) l/s 0.9 0.97 1.01
Pressure drop kPa 35.9 37.4
LPHW Connection Sizes mm 22 22 22
(1) Entering air 24°C/45% RH condensing water in / out: 35/40°C
(2) Entering air 24°C/45% RH water 7°C/12°C
(3) Machine weight Includes a refrigerant charge / Operating weight includes calculated water volume
(4) Based on air temperature of 15.5 °C
leaving the evaporator coil
(5) Based upon low pressure hot water 82 °C inlet / 71°C outlet. Air on 20°C.
(6) Fan gain based on 25 Pa ESP @ nominal air volume. Fan gain figure will change as airflow and ESP change.
W
2
C0