Canon imagePROGRAF iPF510 - Manual (Page 145)

Handling rolls
Specifying the Cutting Method for Rolls
How a roll is cut after ejection varies depending on the printer settings.
Cutting Method Menu Settings Driver Setting
Automatic Rolls are automatically cut by the Cutter
Unit. Automatic Yes
Eject
(→P.132) Choose this setting if you prefer not to
have documents dropped immediately after
printing, as when waiting for ink to dry.
To cut the roll paper using the Cutter Unit,
hold down the Stop/Eject button for a
second or more. Eject Yes
Manual
(→P.133) Choose this setting when using paper or
media that cannot be cut using the Cutter
Unit.
Cut each page from the roll using scissors.
For continuous printing (if you will cut each
page later), in Auto Cut, select Yes, or
select Print Cut Guideline.
(→P.437)
Cutting
Mode
Manual NoYesPrint
Cut Guideline
Paper
Cutting
(→P.134) Choose this option if you want to cut pages
by pressing Cutter Unit buttons for manual
cutting after printing when the printer driver
is congured to Auto Cut > No or Print
Cut Guideline.
Otherwise choose this option if you want to
cut the roll edge after loading a roll. Paper Cut Yes
Auto
Cut
NoPrint Cut
Guideline
Note
• Automatic and Eject are valid only when you have specied Auto Cut > Yes in the printer driver.
• With Eject, printing does not resume after a series of jobs have been printed continuously until the
roll is cut.
Cut roll paper manually in the following cases:
Handling Paper 131