Canon imagePROGRAF iPF510 - Manual (Page 164)

Handling sheets
Selecting the Paper Size (Tray)
To change the paper size after paper has been advanced, select the paper size as follows.
Note
• After you press the Feeder Selection button to illuminate the Paper Tray lamp, a screen is displayed for
selection of the paper type. Press ◄ or ► to select the paper type, and then press the OK button. Next,
a screen is displayed for selection of the paper size. Press ◄ or ► to select the size of paper, and then
press the OK button. The printer is now ready to advance the paper.
• If you have sent the print job from a computer beforehand, the screen for paper type and size selection
is not displayed. Printing will start after the paper is advanced.
1.
Press the Menu button to display MAIN MENU.
2.
Press ◄ or ► to select Paper Settings, and then press ▼.
MAIN MENU
Paper Settings ↓
3. Press ◄ or ► to select Manual Pap.Size, and then press ▼.
Paper Settings
Manual Pap.Size ↓
Note
• Manual Pap.Size is not displayed unless paper is loaded in the Tray.
4.
Check the paper size.
To use the paper size without changing it, press the OK button. To change the paper size, press
◄ or ► to select another size, and then press the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
Manual Pap.Size
= ISO A4
If you selected Manual Input in Manual Pap.Size, enter the paper size and press the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
Manual Input
=297.0 mm
Important
• When centering originals on the paper and during HP-GL/2 printing, always specify the same type
and size of paper in the printer menu and printer driver.
Jobs will not be printed correctly if the type and size do not match.
150 Handling Paper