Canon imagePROGRAF iPF510 - Manual (Page 62)

Control Panel
First Level Second Level Third Level Fourth Level Fifth Level Sixth Level
Job Log (Choose from
information about
the latest three
print jobs.) Document Name
User Name
Page Count
Job Status OK
CANCELED
Print Start Time yyyy/mm/dd
hh:mm
Print End Time yyyy/mm/dd
hh:mm
Print Time xxx sec.
Print Size xxxxxxxxsq.
mm
Media Type
Interface USB
Network
IEEE1394
Ink
Consumption xx.x ml
Counter Cut Count
*1: Displayed if a roll is loaded.
*2: Displayed if the Roll Feed Unit is installed.
*3: Displayed if Chk Remain.Roll is On.
*4: Displayed if IP Mode is Automatic.
*5: Only these menus are displayed during printing.
*6: For information on the types of paper the printer supports, refer to the Paper Reference Guide.
(→P.103) The paper type setting in the printer driver and related software (as well as on the Control
Panel ) is updated when you install the Media Conguration Tool from the User Software CD-ROM or if
you change paper information by using the Media Conguration Tool. See the Media Conguration
Tool Guide (Windows) or Media Conguration Tool Guide (Macintosh).
*7: Available only if Auto Detect is Off.
*8: Available only if NetWare is On.
*9: Follows the setting in Date Format.
*10: Displayed if paper is loaded in the tray.
*11: This menu is only displayed during printing.
*12: Not displayed if a roll or a sheet has been fed.
48 Printer Parts