Canon imagePROGRAF iPF510 - Manual (Page 360)

Printing banners or at other non-standard sizes
7. Click the Page Setup tab to display the Page Setup sheet.
8.
Click Manual in the L Paper Source list.
9. Click Custom Size in the A Page Size list to display the Custom Size Settings dialog box.
10.
Complete the following settings in the Custom Size Settings dialog box.
1. Select mm or inch in Units.
2. Enter “430” [16.9 in] in both Width and Height.
11.
Click OK to close the Custom Size Settings dialog box.
12. Conrm the print settings and print as desired.
Note
• For instructions on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.447)
Printing by using Custom Paper Size
This section describes how to print using Custom Paper Size based on the following example. First, register
a non-standard paper size called “430 mm Square” as a Custom Paper Size.
• Document: Scanned image
• Page size: A square sheet (430×430 mm [16.9×16.9 in])
• Paper: Sheets ( Manual )
• Paper type: Plain Paper
• Paper size: A square sheet (430×430 mm [16.9×16.9 in])
1. Load the square paper (430×430 mm [16.9×16.9 in]) in the Top Paper Feed Slot.
2.
Choose Print in the source application menu.
3. Select the printer in the dialog box, and then display the printer driver dialog box. (→P.453)
346 Enhanced Printing Options