Canon imagePROGRAF iPF510 - Manual (Page 484)

Printer Driver
Setting Item Description
D Fit Paper Size Scales the document image to match the paper size.
E Fit Roll Paper Width Scales the document image to match the roll width.
F Scaling Resizes the document image based on a specied scaling value.
Enter a value in a range of “5-600.”
G Paper Size Choose the size of the paper you will print on.
For details on available paper sizes, see “Paper Sizes”. (→P.109)
H Orientation Choose the printing orientation.
Making the Original Orientation Match the Paper Orientation
(→P.424)
K Rotate Page 90 degrees
(Conserve Paper)
Activate this setting to rotate the document image by 90 degrees
before printing.
Conserving Roll Paper by Rotating Originals 90 Degrees (→P.397)
L Paper Source Choose how paper is supplied.
Options displayed in the list vary depending on the selection in
Media Type in the Main sheet.
M Roll Paper Width Choose the roll width.
For details on available roll widths, see “Paper Sizes”. (→P.109)
N Roll Paper Options Complete optional roll paper settings. Click to display the Roll Paper
Options dialog box.
Under A Automatic Cutting, you can specify Yes or No and Print
Cut Guideline.
Cutting Roll Paper After Printing (→P.437)
Select
B Banner Printing when printing multiple pages continuously.
Printing Multiple Pages Continuously (→P.360)
O Size Options Click to display the Paper Size Options dialog box, which enables
you to register additional paper sizes or select the size system for
use.
S Defaults Restores all settings on the sheet to the default values.
470 Windows Software