Canon imagePROGRAF iPF510 - Manual (Page 683)

HP-GL/2 problems
HP-GL/2 problems
With HP-GL/2, printing is misaligned.
Cause Corrective Action
The plotter origin is incorrect. Check the printing commands.
Lines or images are missing in the HP-GL/2 data that
was printed.
Cause Corrective Action
The memory is full. Check the size of the data in the print job.
A GL/2 command not supported by this printer was
received. Check the print job and settings.
Lines Are Printed Too Thick or Thin During HP-GL/2
Printing
Cause Corrective Action
The Line Width setting in the main menu is incorrect. Conrm the selection in Line Width. If ne lines are
printed faint, setting ThicknFineLines to On in the
main menu will print the lines more distinctly.
(→P.51)
HP-GL/2 jobs are printed in monochrome (or color).
Cause Corrective Action
The color mode is incorrect. On the printer Control Panel, check the color mode
setting.
(→P.51)
For optimal printhead performance, the printer consumes trace amounts of color ink even in monochrome
mode.
Printed Colors in Line Drawings are Inaccurate During
HP-GL/2 Printing
Cause Corrective Action
Adj Faint Lines in the main menu is set to On. Selecting Off may help produce the expected results.
However, lines in some colors may appear broken.
HP-GL/2 printing takes a long time.
Cause Corrective Action
Large print jobs with a lot of data take longer to print. On the printer Control Panel, set Input Reso. to
300dpi.
(→P.51)
Troubleshooting 669