Canon imagePROGRAF iPF510 User Manual
Page 602
Adjusting the feed amount
Note
•
Always specify the paper type when loading paper. Using paper that you have not specied on the
printer may cause feeding problems and affect the printing quality.
•
We recommend using the type of paper you use most often for feed amount adjustment.
2.
Press the Menu button to display MAIN MENU.
3.
Press ◄ or ► to select Adjust Printer, and then press ▼.
MAIN MENU
Adjust Printer ↓
4.
Press ◄ or ► to select Auto Band Adj., and then press ▼.
Adjust Printer
Auto Band Adj. ↓
5.
Press ◄ or ► to select Standard Adj., and then press ▼.
Auto Band Adj.
Standard Adj. ↓
6.
Press ◄ or ► to select Yes, and then press the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
Standard Adj.
= Yes
Note
•
The following screen is displayed if automatic feeding is selected when an optional Roll Feed Unit
is installed but no roll is loaded. In this case, select the paper source and press the OK button. If
Cassette is selected on the following screen, or if automatic feeding is selected when an optional
Roll Feed Unit is not installed, select the type and size of paper loaded in the Cassette.
Media Source
= Roll
A test pattern is printed for band adjustment.
After reading the pattern, the printer automatically adjusts the feed amount and returns to online
mode.
If printed documents are still affected by uneven contrast or banding in different colors at regular
intervals after this adjustment, you can adjust the feed amount during printing. (→P.589)
588 Adjustments for Better Print Quality