Canon imagePROGRAF iPF510 - Manual (Page 626)

Printheads
Replacing the Printhead
Follow the steps below to replace the Printhead. Failure to follow this procedure may cause ink leak from
the Printhead, which may cause stains.
Note
• Prepare a new Ink Tank when ink levels are low.
• Your hands may become dirty during Printhead replacement. Use the gloves provided with the new
Printhead for replacement.
• Choose On in Auto Print to have the printer automatically adjust the Printhead alignment after
replacement of the Printhead. (→P.51)
1. If the roll is not ejected because of the cutting method selected, cut it manually and remove it.
(→P.437)
2. Clean inside the Top Cover. (→P.627)
3.
Press the Menu button to display MAIN MENU.
4.
Press ◄ or ► to select Maintenance, and then press ▼.
MAIN MENU
Maintenance ↓
5. Press ◄ or ► to select Replace P.head, and then press ▼.
Maintenance
Replace P.head ↓
6.
Press ◄ or ► to select Yes, and then press OK.
The setting is updated, and an equals sign “=” is displayed at left.
Replace P.head
= Yes
Please Wait.. is shown on the Display Screen, and excess ink is absorbed.
Replace P.head
Please Wait..
After about three minutes, Open UpperCover is shown on the Display Screen.
Replace P.head
Open UpperCover
612 Maintenance