Canon imagePROGRAF iPF510 - Manual (Page 349)

Printing banners or at other non-standard sizes
6.
Click the Page Setup tab to display the Page Setup sheet.
7.
In the A Page Size list, click the size you registered, "My Horizontal Banner."
8. Select the C Enlarged/Reduced Printing check box.
Note
• If the Enlarged/Reduced Printing check box is not displayed on the Page Setup sheet, clear the
B Borderless Printing check box.
9.
Click Roll Paper in the L Paper Source list.
10. After you click E Fit Roll Paper Width, the Information dialog box is displayed.
11.
Select the width of the loaded roll in the Roll Paper Width list. In this case, click 16-in. Roll
(406.4mm), and then click OK.
Enhanced Printing Options 335