Canon imagePROGRAF iPF510 - Manual (Page 514)

Printer Driver
Media Detailed Settings Dialog Box (Mac OS X)
The Paper Detailed Settings dialog box offers the following settings. For details on settings items, refer to
the printer driver help.
Note
• To display the Paper Detailed Settings dialog box, on the Main pane, click Settings by Media
Type. (→P.496)
Setting Item Description
A Media Type Select the paper type.
For information on the types of paper the printer supports, refer to the Paper
Reference Guide. (→P.103)
B Drying Time Specify the time that the printer waits for ink to dry, as needed. The Drying
Time setting is only valid for rolls.
(→P.128)
C Between Pages Specify the time the printer waits after printing a page until ejecting the
paper, as needed.
D Between Scans Specify the time the printer waits after printing a line on the page until
printing the next line, as needed.
E Roll Paper Margin for
Safety
You can specify the length of a margin on the leading edge of paper to
ensure that paper susceptible to curling is held rmly against the Platen.
F Near End Margin Specify the length of the Near End Margin (the leading edge margin) of the
roll, as needed.
G Cut Speed Select the speed of automatic cutting, as needed. You can adjust this setting
if paper is not cut well when automatic cutting is used.
H Automatic Cutting You can activate or deactivate Automatic Cutting and printing of cut lines,
as desired. In this list, specify Yes, No, or Print Cut Guideline.
J Mirror Specify whether to print a mirror image, as needed. Select this option to print
a version of the document or image with the left and right sides inverted.
500 Mac OS X Software