Canon imagePROGRAF iPF510 - Manual (Page 71)

Control Panel
Interface Setup
Setting Item Description, Instructions
EOP Timer Specify the timeout period for print jobs.
TCP/IP Specify the TCP/IP protocol settings. To apply your
changes, choose Store Setting.
IP Mode Choose whether the printer IP address is congured
automatically or a static IP address is entered
manually.
DHCP
BOOTP
Protocol
RARP
Specify the protocol used to congure the IP
address automatically.
IP Address
Subnet Mask
TCP/IP
IP Setting
Default G/W
Specify the printer network information when using
a static IP address.
Enter the IP address assigned to the printer, as well
as the network subnet mask and default gateway.
NetWare Specify the NetWare protocol. To apply your
changes, choose Store Setting.
Frame Type Specify the frame type to use.
NetWare
Print Service Choose the print service.
AppleTalk Specify whether to use the AppleTalk protocol. To
apply your changes, choose Store Setting.
Auto Detect Specify the communication method. To apply your
changes, choose Store Setting.
Choose On for automatic conguration of the
LAN communication protocol. Choose Off to use
settings values of Comm.Mode and Ethernet
Type.
Comm.Mode Choose the LAN communication method.
Ethernet Type Choose the LAN transfer rate.
Spanning Tree Choose whether spanning-tree packets are
supported over the LAN.
Ethernet Driver
MAC Address Displays the MAC address.
Return Defaults A conrmation message is displayed if you press
the ▼ button. Choose OK to restore the network
settings to the default values.
Printer Parts 57