AltiGen comm ACM 5.1 - Manual (Page 187)

Chapter 12: Trunk Configuration
AltiWare ACM 5.1 Administration Manual 173
• Non Workdays
Within each of these three time slots, you have the following routing options for incoming
calls:
• Route to an extension selected in the drop-down list
• Route to an auto attendant number selected in the drop-down list
• Route to the operator
Outgoing Call Blocking
To set outgoing call blocking for a trunk, select the trunk in the General tab, then click
the Out Call Blocking tab in the Trunk Configuration window.
Figure 16. Trunk Configuration, Out Call Blocking tab
If you select Trunk allowed for Outside Calls at Any Time, call restrictions set in
System Configuration, Outcall Routing, and Extension Configuration still apply to calls
made on the trunk.
If you select Outside Calls Allowed According to The Following Schedules, you can
then use the Schedule 1, 2, and 3 options to set up to three different time periods during
which calls are allowed. You can use Apply to to apply the settings to multiple trunks.