AltiGen comm ACM 5.1 - Manual (Page 278)

Chapter 20: Paging Group Configuration
264 AltiWare ACM 5.1 Administration Manual
Figure 1. Paging Group Configuration window
To set up a Paging Group:
1. In the Paging Group configuration window, below the Group List, click the Add
button.
2. Enter a number for the paging group in the Add New Group dialog box.
3. Check the Global Group check box if you want this group to be visible to other
gateways.
4. Click OK.
5. In the Group Information field, type in the following:
• First Name and Last Name of the paging group, each with a maximum of 32
characters.
•
Password for the paging group. The default is the system password set on the
Number Plan tab of the System Configuration window.
• Description for the paging group.