AltiGen comm ACM 5.1 - Manual (Page 364)

Chapter 25: Enterprise VoIP Network Management
350 AltiWare ACM 5.1 Administration Manual
Note: After you make the change, extensions 403 and 404 can be dialed only by the
users in their own system.
Relocating a Global Extension
The administrator can relocate a global extension from one system to another. In
addition, a user may be allowed to relocate a global extension by using the feature code
#27. To allow a user to use this feature, check the appropriate check box in the
Relocation panel on the Resolve tab. The behavior of this feature differs, depending on
whether an analog or IP phone is being used. (See page 352.)
Note: The check box is available only if a global extension is selected and that extension
has no conflict.
When a global extension (extension 1001, in this example) is moved from site A to site
B, this is what happens:
• The following configurations are replicated from site A to site B:
• First Name
• Last Name
• Password
• Extension Number
•
DID Number
•
Dial by Name
•
Disable Mailbox option (Extension Configuration, Mail Management tab)
•
Site A marks extension 1001 as removed and adds it to a Relocated Extension List
(REL). The configuration of extension 1001 is still remembered in site A, even though
it appears to be removed.
Ext. System A System B System C
403 Local Local Local
404 Local Local Local
User can relocate
extension, if
checked
Admin can always
relocate
extension