AltiGen comm ACM 5.1 - Manual (Page 256)

Chapter 18: Mobile Extension Configuration
242 AltiWare ACM 5.1 Administration Manual
3. When you are finished adding channels as mobile trunks, restart AltiWare.
A MobileExt virtual board appears in the Boards window.
Figure 3. Boards window with virtual MobileExt board displayed
4. Note the logical ID of the MobileExt board. In Figure 3, it is 15.
To set up a mobile extension
1. Open the Extension Configuration window.
2. To assign an extension to a mobile extension port, select a virtual extension and
change it to a physical extension.