AltiGen comm ACM 5.1 - Manual (Page 264)

Chapter 19: Hunt Group Configuration
250 AltiWare ACM 5.1 Administration Manual
The Huntgroup Configuration window provides for creating hunt groups, setting their
attributes, and assigning group members. To open the Huntgroup Configuration window,
select PBX > Huntgroup Configuration.
Figure 1. Huntgroup Configuration window
Overview of Huntgroup Configuration Window
These are the tabs in the Huntgroup Configuration window:
•
General—add or delete a hunt group, assign a group name, password, and DID
number
•
Group Member—add or remove members from huntgroups
• Mail Management—capacity and feature options for hunt group mailboxes
• Notification—preferences and options for voice mail notification
• Call Handling—call forwarding, call waiting, and call handling preferences and
options
•
Queue Management—options for setting default or custom phrases used as queue
announcements
Apply to Button
The Huntgroup Configuration window often allows you to apply changes to a particular
hunt group or to select many huntgroups to which to apply the changes.
The Apply to button is disabled unless there is a change that can be applied to multiple
hunt groups, and when you use it to apply changes to multiple hunt groups, it works on
only those changed attributes that can be applied.
Setting Up Huntgroups
Set up new huntgroups in the Huntgroup Configuration window.