AltiGen comm ACM 5.1 - Manual (Page 205)

Chapter 14: Out Call Routing Configuration
AltiWare ACM 5.1 Administration Manual 191
3. On the Dialing Pattern tab of the Out Call Routing Configuration window, add
dialing pattern definition entries for the following prefixes:
• prefix = 0, length = 11
•
prefix = 00, length = 14
• prefixes = 1-9, each length = 7
In the Route Priority field, use the drop-down list to select the En-Bloc route
definition (assigned in step 2).
The Dialing Pattern tab should look as follows:
With this configuration, the system will see that all digits have been collected and will
send digits to the CO, instead of waiting 7 seconds for the dialing to finish.