AltiGen comm ACM 5.1 - Manual (Page 66)

Chapter 4: System Configuration
52 AltiWare ACM 5.1 Administration Manual
Setting General Parameters
Use the General tab in the System Configuration window to set the system ID, area
code, main number, and country; extensions for the manager, the operator, the MeetMe
conference administrator; and options for distinctive ring, conference bridge, and
system call park.
Figure 1. System Configuration, General tab
You can set the following parameters and options:
Parameter Description
System ID Assign a number (1-100) to the system. This ID will be
used to differentiate call records if multiple systems are
writing call records to a same external database.
If you intend to create a multi-site VoIP domain, this
number will also be the Server ID, which is used and
displayed in AltiEnterprise Manager. In a multi-site VoIP
domain, each System ID/Server ID must be unique and
must be the same length. Once a server is part of a VoIP
domain, you cannot change the System ID.
Country Select a country for the system. This configuration ties to
a tone table matched to the country's telecom interface
specification.