AltiGen comm ACM 5.1 - Manual (Page 255)

Chapter 18: Mobile Extension Configuration
AltiWare ACM 5.1 Administration Manual 241
button. In the dialog box that appears, click the Add/Remove Mobile Trunks
button.
Figure 2. Adding a mobile trunk
The Add/Remove Mobile Trunks dialog box appears.
2. Add trunks to the Mobile Trunk Member List from the Not Member List by
selecting the channels and clicking the Left Arrow button.
If PRI span is used, only the whole span can be added or removed, not individual PRI
channels. T1 and analog trunks are added or removed individually.
Note: Although a whole PRI span is added, if Mobile Trunk Allocation is selected
as Shared (see Figure 5 on page 244), individual trunks, when idle, still can
be used dynamically by normal PRI trunk traffic or mobile extensions.