ARRI ARRIFLEX 416 - Manual (Page 109)


10 10
• When the required number is reached, press the
Enter/Insert key Ñ to store this setting under the given
number. The word DONE will appear for 3 seconds
to indicate that the setting was stored. After this, the
display will return to its normal mode.
The new set of settings will immediately replace
the old set of settings. The old settings can not
be recalled.
Load Settings
It is possible to load one out of five settings. The new settings
will influence all adjustments that can be made electronically.
The new settings will immediately replace the
previous settings. If the old settings might be
needed again, store them first as described in
the previous chapter Store Settings.
• Move the cursor > with the Ê and Ë keys to the line
– LOAD SET. Pressing the Í key will switch from 1 to 2
all the way up to 5 and back to 1, the Ì key will switch
in the opposite direction. Pressing either the Í or Ì
keys will immediately load the new settings.
MENU LOAD/STORE
-> - STORE SET 1
(CONFIRM BY
ENTER)
- LOAD SET 1
(NO UNDO)
- SET ALL
SETTINGS TO
DEFAULT
- EXIT
Video-A
ss
is
t-Sy
stem
MENU LOAD/STORE
- STORE SET 1
(CONFIRM BY
ENTER)
-> - LOAD SET 1
(NO UNDO)
- SET ALL
SETTINGS TO
DEFAULT
- EXIT