ARRI ARRIFLEX 416 - Manual (Page 4)



Contents
7. Camera Body .................................................43
7.1 Mechanically Adjustable Mirror Shutter ............43
Setting the Mirror Shutter Angle .......................43
Shutter Angle Measurement .............................44
Filming with HMI Light ....................................45
7.2 Exchanging the Fibre Screen ...........................46
7.4 Attaching the Magazine .................................47
7.5 Removing the Magazine .................................48
8. Optics ..............................................................49
8.1 Lenses ...........................................................49
Attaching Lenses .............................................49
8.2 Viewfinder System ..........................................50
The Eyepiece ..................................................50
Adjusting the Viewfinder .................................51
9. Camera Operation ........................................55
9.1 Main Camera Switch ......................................55
9.2 Running and Stopping the Camera ..................55
Running the Camera ........................................56
Stopping the Camera ......................................56
Inching ..........................................................57
9.3 Displaying and Setting Operational Parameters ...57
Overview of Display Modes ............................58
Overview of Display Symbols ..........................59
Film Counter ..................................................60
Frame Rates ...................................................62
Shifting phase ................................................64
Displaying Power Supply Voltage
(Mode 3) .......................................................64
Displaying On-board Battery information
(Mode 3) .......................................................65
Setting the Low Battery warning level
(Mode 3) .......................................................66
Displaying the Timecode Time and Frame Rate
(Mode 4) .......................................................67
Turning Timecode Recording On and Off
(Mode 4) .......................................................67
Displaying and Setting the Timecode User Bits
(Mode 5) .......................................................68
Setting the brightness of the button illumination
(Mode 6) .......................................................68
Switching the Beeper On and Off
(Mode 6) .......................................................69
Setting the Volume of the Warning Signal
(Mode 6) .......................................................69
Selecting a Preset ARRIGLOW Color
(Mode 7) .......................................................70
Setting a User-Adjustable ARRIGLOW Color
(Mode 7) .......................................................71