ARRI ARRIFLEX 416 - Manual (Page 110)


110 110
All Settings to Default
When the function set all settings to default is
called, all settings are cleared. They cannot be
recalled.
This menu recalls default setting for all values. This makes
it possible to obtain basic setting throughout the IVS.
• Move the cursor > with the keys Ê and Ë to the line
– SET ALL. Pressing the key Í or Ì recalls the default
values and overwrites all stored settings.
• It is necessary to confirm this procedure, as all settings
will be cleared. This window will appear with the
cursor > in the line NO. Pressing the key Í or Ì will
cancel the procedure.
• To clear everything, move the cursor > with the keys
Ê and Ë to the line – YES. Pressing the key Í or Ì
sets all settings to default.
• If the cursor > is in position EXIT and the key Í or Ì
is pressed, the IVS will return to the Load/Store menu
without setting everything to default.
The default values are:
WB = INDOOR
Manual Gain with GAIN = 0
FLICKER FREE = ON
LINE INTERPOLATION = ON
ARE YOU SURE?
(NO UNDO)
-> - NO
- YES
- EXIT
Video-A
ss
is
t-Sy
stem
MENU LOAD/STORE
- STORE SET 1
(CONFIRM BY
ENTER)
- LOAD SET 1
(NO UNDO)
-> - SET ALL
SETTINGS TO
DEFAULT
- EXIT