ARRI ARRIFLEX 416 - Manual (Page 15)


1 1
.InstallationoftheCamera
4.1 Packing and Transport
In order to prevent damage to the mirror
shutter, a protective cap must be in the lens
mount receptacle at all times.
When the ARRIFLEX 416 is transported or
stored without a magazine, the magazine
opening cover a photo should be in place.
Loaded or empty magazines should only be
transported or stored with the loop protector
a photo attached to avoid damage to the film
stock and the magazine throat assembly.
4.2 Tripod & Remote Heads
The following tripod heads are suitable for use with the
ARRIFLEX 416:
• ARRIHEAD
• ARRIHEAD 2
• ARRIHEAD 2 with integrated encoders
• ARRI fluid heads
• Sachtler Studio 7, 150 H
• Mitchell head
• OConnor 1030/2060/2575
• Moy head
• Ronford Mini 7/F7/2003/2015/Atlas 30/Atlas
• A&C Pee Pod 500, 1000 & 1600/Power Pod
2000 & Classic
• Hot Head
• Cam-Remote head
• Worall head
In applications where the camera mount is subject
to high forces (e.g. helicopter mounts) the camera
must be additionally secured with retaining cords.
All fastening screws must be tightened firmly with
an appropriate screwdriver (not with the commonly
used coin!).
In
stallation