ARRI ARRIFLEX 416 - Manual (Page 207)


0 0
Remote Control Unit RCU-1
The RCU-1 a photo is a practical remote control unit for
use with all of the latest generation ARRIFLEX camera models.
It can be used in all applications that call for an uncompli-
cated, quick, sturdy and yet still comprehensive remote control.
Complete programs can easily be created to control changing
of frame rate over a certain period of time. These programs
are repeatable and can be recalled as necessary.
The RCU-1 automatically calculates the actual screen-time
for the programmed speed ramps. running values can be
regulated with the large hand wheel.
The free programming of individually defined minimum
and maximum values as end stops is particularly useful.
The illuminated LCD quickly, precisely and comprehensively
shows all set values as well as the status of the camera, or
the RCU-1 respectively, including all warning signals.
• The RCU cable is connected to the “REMOTE“ socket
a photo on the camera.
For further information see the RCU-1 instruction manual.
Note: CCU, RU and LCC are not supported and could
cause malfunction if connected.
Acce
ss
orie
s