ARRI ARRIFLEX 416 - Manual (Page 146)


1 1
The menu EDIT TEXT is displayed on the screen:
• The X Symbol shows the position in the user text line that
is to be changed. Move this text inserter cursor X left and
right with the Í and Ì keys to the desired position.
• Change the character to be inserted with the Ê and
Ë keys.
• Once the desired character is selected, move the text
inserter cursor X to the next position.
• To leave the text edit mode, press the Enter/Insert key
Ñ . This will lead back to the user text menu.
MENU EDIT TEXT
(.................)
>X <
(.................)
> <
(.................)
> <
MOVE THE CURSOR X <>
CHANGE CHARACTER ^
v
EXIT PRESS E
Video-A
ss
is
t-Sy
stem
Edit Text using the ARRI software User Text Line IVS
• Connect a computer to the ARRIFLEX 416 camera using
a cable KC 89-S (K2.65002.0). Connect the cable
between the REMOTE connector on the camera side and
the serial port on the computer. Computers with no serial
interface, such as new laptops, can use an USB to serial
adapter, which is available in computer hardware shops.
• Select the output channel on your computer (COM 1 to
COM 4).
• Make sure that the USER TEXT LINE is switched on
• Type the necessary information into the editing line.
Click the Send Line button to send the text the IVS.
• Save Text allows you to store a text line, Load Text
loads a text line from the hard disc into the editing line.