ARRI ARRIFLEX 416 - Manual (Page 167)


1
Position 2
The insertion of VITC can be on single or multiple lines
between lines 6 and 22. If the same line number is
selected on both position 1 and position 2, the insertion
will be single line; otherwise it will be multiple lines. The
value of position 1 can be higher or lower than that of
position 2.
• Move the cursor > with the Ê and Ë keys to the line
– POSITION 2. By pressing the Í key the value will be
increased until line 22 is selected. By pressing the Ì
key the value will be decreased until line 6 is reached.
Exit
Return to the main menu using Exit.
• Move the cursor > with the Ê and Ë keys to the line
– EXIT and press the Í or Ì keys.
Note: Pressing the Enter/Insert key Ñ for more than
three seconds will cause the system to exit the
on-screen programming mode completely,
regardless of which menu is activated, with the
exception of the positioning mode.
Video-A
ss
is
t-Sy
stem
MENU VITC LINE
- VITC LINE ON
- POSITION 1 10
-> - POSITION 2 12
- EXIT
MENU VITC LINE
- VITC LINE ON
- POSITION 1 10
- POSITION 2 12
-> - EXIT