ARRI ARRIFLEX 416 - Manual (Page 213)


1 1
Cleaning the Field Lens
• Briefly press the “PHASE” button, to position the shutter
to protect the mirror surface from damage as far as
possible.
• Before cleaning the field lens, switch the camera’s main
switch off and disconnect from the power supply!
• Remove the lens or the protective cap from the
camera‘s lens port.
Do not touch the mirror surface!
• Pull the fibre screen a photo out of the holder by its
tongue a photo using the special forceps.
• Pull the field lens a photo out of the holder by its
tongue a photo using the special forceps.
• Clean the field lens with a dry, lint-free cloth.
• Make sure that the frame is completely clean.
• Using the special forceps, push the field lens as far as
it will go into the holder. A sprung-ball catch fixes the
field lens in the correct position.
• Check that the fibre optic screen and its frame are
completely clean.
• Using the special forceps, push the fibre optic screen
into the holder as far as it will go. A sprung-ball catch
fixes the fibre optic screen in the correct position.
Maintenance
tongue
fibre screen
field lens
mirror