ARRI ARRIFLEX 416 - Manual (Page 8)



Do not operate the system in high humidity
areas or expose it to water or moisture.
Do not place the system on an unstable trolley,
stand, tripod, bracket, or table. The system may
fall, causing serious personal injury and
damage to the system or other objects.
Operate the system using only the type of
power source indicated in the manual. Unplug
the power cable by gripping the power plug,
not the cable.
Never insert objects of any kind into any part
of the system through openings, as the objects
may touch dangerous voltage points or short
out parts. This could cause fire or electrical
shock.
Unplug the system from the power outlet before
opening any part of the system or before
making any changes to the system, especially
the attaching or removing of cables.
Do not use solvents to clean.
Clean optical surfaces only with a lens brush or
a clean lens cloth! In case of solid dirt moisten
a lens cloth with pure alcohol.
Discard contaminated lens cloth after use.
Do not use it to clean lens.
Do not loosen any screws which are painted
over!
Safety
In
str
uction
s