Camera operation, 1 main camera switch, 2 running and stopping the camera – ARRI ARRIFLEX 416 User Manual
Page 55: Camera operation, Cameraoperation
Advertising
.CameraOperation
9.1 Main Camera Switch
• If using a mains unit, switch it on.
• Connect the camera to the mains unit or battery.
• Push the “ON/OFF” button
a
photo
to turn the
camera on. Push the “ON/OFF” button for approx. 3
seconds to turn the camera off again.
Note:
If the camera power supply is interrupted, the
camera remembers whether it was on or off
before the interruption and returns to that state
when power is restored. This is useful if the
camera is rigged in a situation where access is
difficult as the battery can be changed without
having to press the “ON/OFF“ button.
Camera
Operation
RUN button
9.2 Running and Stopping the
Camera
A “RUN” button is located on both sides of the camera
a
photo
.
Advertising